1 / 1
EVA 2.4.2 Queen Shroud GY-291 ADXL345 (15mm)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed the EVA Queen Shroud to fit a GY-291 ADXL345 with 15mm hole spacing
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 83
- Wydruki
- 1
- Wyświetlenia
- 612
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The offical ADXL shrouds from Paweł Kucmus have 16mm.
I adjusted the “Queen Shroud” to fit a GY-291 ADXL345 with 15mm.
No heat inserts needed. Use two M3x6 Cap Head Screws to mount it in the plastic.
more about EVA: https://main.eva-3d.page/