Magnetic Headphone Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Have trouble figuring out how to mount your headphones to your metal desk... Look no further than this Magnetic Mount!
- Ocena
- 4,5 / 5
- Polubienia
- 65
- Pobrania
- 480
- Wydruki
- 2
- Wyświetlenia
- 2569
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This Magnetically attached headphone holder uses six 5/16'' by 1/8'' round neodymium magnets. The magnets I chose to use are from Harbor freight and are in stock at most of their locations. This design is universal but was developed for the Logitech G PRO X and PRO X 2 Wireless Headset (it matches the shape of the padding as to not indent the foam). This item is also available on my Etsy with additional updates.
Assembly
This model should print with no supports and the magnets should press fit into the holder. (you may need to use some super glue to retain the magnets since all printers are a little different) If you assemble this and your headphones cause the holder to fall you can add 2 strips of electrical tape (about 1 inch each) to give the holder extra grip.
Note:
When installing the magnets the poles should alternate North then South both horizontally and vertically. This will “magnify” the magnetic field in the metal you are attaching this too increasing the holding strength of your headphone holder.