LIPO battery holder for 8020 series 10 - Supports Second level of platforms
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An 8020 series 10 based holder for an 2s or 3s LIPO battery pack.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 205
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
An 8020 series 10 based holder for an 2s or 3s LIPO battery pack. The holes on the sides can be used for mounting things, like switches, buck converters or voltage regulators. The section of beam allows a carrier for a micro controller. processor or a sensor to be mounted on top of the battery holder.
There are three other options in the ability to stack carriers is not needed:
Side Mount: https://www.thingiverse.com/thing:3851500
Perpendicular Mount: https://www.thingiverse.com/thing:3851508
Center Mount: https://www.thingiverse.com/thing:3851488
Print instructions
Unassociated tags: 2s lipo
Category: Robotics Summary
An 8020 series 10 based holder for an 2s or 3s LIPO battery pack. The holes on the sides can be used for mounting things, like switches, buck converters or voltage regulators. The section of beam allows a carrier for a micro controller. processor or a sensor to be mounted on top of the battery holder.
There are three other options in the ability to stack carriers is not needed:
Side Mount: https://www.thingiverse.com/thing:3851500
Perpendicular Mount: https://www.thingiverse.com/thing:3851508
Center Mount: https://www.thingiverse.com/thing:3851488