Virpil MongooseT-50 Throttle mount to 40 Series Profile
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount for a Virpil MongoosT-50 Throttle. There are two versions. There is a _CM1 version with an additional…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 538
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
This is a mount for a Virpil MongoosT-50 Throttle.
There are two versions. There is a _CM1 version with an additional hole so you can reach both detent adjustments on the bottom of the original throttle.
Like my CM2 stick base, this mounts to a vertical piece of 40 series 40x40 profile.
The 40mm x 70mm bolt pattern is shared by all 3 of the MongoosT-50 Throttles.
Hardware needed:
4 x M5-20mm socket head hex bolts to secure the mount to the Throttle.
4 x M8-16mm Bevel head hex bolts
1 x M8-16mm socket head bolt
5 x M8 T-nuts
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.15mm
Infill:
15
Filament: Prusament PLA Jet Black
Notes:
Print with 1mm Top and Bottom, and 6 perimeter walls.
Category: Toys & Games