Virpil MongooseT-50 Throttle mount to 40 Series Profile
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a mount for a Virpil MongoosT-50 Throttle. There are two versions. There is a _CM1 version with an additional…
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 42
- Makes
- 0
- Views
- 538
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution
This is a mount for a Virpil MongoosT-50 Throttle.
There are two versions. There is a _CM1 version with an additional hole so you can reach both detent adjustments on the bottom of the original throttle.
Like my CM2 stick base, this mounts to a vertical piece of 40 series 40x40 profile.
The 40mm x 70mm bolt pattern is shared by all 3 of the MongoosT-50 Throttles.
Hardware needed:
4 x M5-20mm socket head hex bolts to secure the mount to the Throttle.
4 x M8-16mm Bevel head hex bolts
1 x M8-16mm socket head bolt
5 x M8 T-nuts
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.15mm
Infill:
15
Filament: Prusament PLA Jet Black
Notes:
Print with 1mm Top and Bottom, and 6 perimeter walls.
Category: Toys & Games