1 / 1
Siren F3 DJI O3 Air Unit spacer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacer to allow you to mount the DJI O3 "right way" up, and hide stuff underneath.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 125
- Wydruki
- 0
- Wyświetlenia
- 718
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Uses the 20x20 M2 mounting holes on the Siren F3 frame. Printed in PETG.
Added a new version for anyone wanting to use m2 thread inserts. Just a tip, screw in the m2 screws all the way BEFORE attaching to the O3, this will push out any melted filament. Better to do this when you can remove the excess from the other side (the side that attaches to the O3). Doing this helps with the overall fit.