Liczymy pasujące modele…
If you have any needs, please contact us - [email protected] Get PS-2 : https://quadmula.com/products/ps-2-profile-spacer Get PS-3 : https://quadmula.com/products/quadmula-ps-3-profile-spacer
Get PS-3 profiled spacer - https://quadmula.com/products/quadmula-ps-3-profile-spacer Capacitor use Rubycon ZLH series
We've designed this camera mount for our DJI Osmo Action 4 to fit the Quadmula Siren F5 Mini Split. This mount comes in two types, with just the record button hole or with a big hole for easier removal of the camera. RECCOMENDATIONS:…
3D print file for QUADMULA Djinn F25
A simple antenna mount for the T-mount stock IMRC Ghost receivers antennas. For QUADMULA SF3 To install the T-style antenna into the Mount, slide one side of the white part of the receiver into the mount, then flex the mount to about 90°…
3D print file for QUADMULA Djinn F25 SP *The parts of Djinn F25 SP and Djinn F25 Split are completely incompatible. TPU BlackishGreen - Link
3D print file for QUADMULA Siren F5 S2 The TPU used officially has a hardness of 95A *except for the camera side plates(cam shell) and the action camera base, all other TPU parts of Siren F5 S2 and Siren F5/Siren F5 Split are…
3D print files for the QUADMULA SirenA F35. The TPU used in our official parts has a hardness of 95A. *Please note that some Exclusive TPU Parts are offered exclusively as finished products, so their STL files are not publicly released.…
Get PS-3 profiled spacer - https://quadmula.com/products/quadmula-ps-3-profile-spacer Capacitor use Rubycon ZLH series
Here are O4 Pro mounts for the Quadmula Siren F5 and F5 Mini. I like running the XT60 over VTX and out the top/back of quad, so I made the U shape mount to give some clearance for that. There is a version for T-shaped receiver antenna…
Quadmula F5/DJI O3 "Shorty" Antenna Holder. You'll have to remove the black plastic “straw” completely from the O3 antenna. But it's not too hard to do, just pull & cut. 3mm shorter than the back standoffs so there is room for the…
Currently, many of you own the Siren series designed specifically for the O3. Due to its compact design, it isn’t directly compatible with the O4 Pro. But don’t worry—we’ve got an alternative solution! These adapters work with 2.5, 3,…
Here are O4 Pro mounts for the Quadmula Siren F3 and F35. I like running the XT30/XT60 over VTX and out the top/back of quad, so I made the U shape mount to give some clearance for that. There is a version for T-shaped receiver antennas…
Well, for all those as crazy as me wanting to fit a Gep M10 GPS to a Siren F3 frame…here you go. Needed a little 3 inch with GPS for safety reasons. Print in TPU. Be CAREFUL, it is a tight fit. Insert the GPS module from the top, starting…
This is a 2 in one mount for your O3 Single Antenna and a spot to keep your elrs antenna in place! Print in TPU.
It's a mount for GPS on M10 chip in mini formfactor. FlyfishRC GPS M10 mini fits well
UPDATE 01.18.25 I still haven't figured a good tolerance because the TPU absorbing moisture and expand. It seems that no matter what clearance I give it it will still absorb to be snug after a few months. The only solution I found is to…
Thinned up the stock armguards and front bumper from Quadmula, made a superlite gps holder for the Flywoo GOKU GM10 Nano V3 GPS. The GPS holder comes in 3-different thicknesses 0.5mm, 1.0mm, 1.5mm If you want something designed for the…
This is fitted for my setup (see pic), with dual capacitors in the front with the stock holder printed at 150% Z, and a Vifly Finder 2 mounted in the second single capacitor holder. Let me know if you need a dimension tweaked for however…
Designed this mount for the RadioMaster RP1 V2 ELRS receiver, it is meant for the Quadmula Siren / SF3 / SF35 but will work for any drone with a 3.5mm standoff diameter and 20mm between standoffs. I recommend printing at at least 103%…
The existing mount I used for the Radiomaster RP1 didn't work for the V2 so I designed a replacement.
Get PS-3 profiled spacer - https://quadmula.com/products/quadmula-ps-3-profile-spacer Capacitor use Rubycon ZLH series
This antenna mount is designed to fit the Foxeer stubby Lollipop antennas that go directly to UFL, not SMA. lower mounting position will fit Crossfire and other antennas alike. there are holes for small zip ties to secure the RX antenna…
Siren F5 dual tubed antenna mount. one has a mount for a 2.4g antenna mounted internally.
I am pretty satisfied with that one. It took me several days to fit it nice and snug to my beloved quadmula siren split f3 quad and it was worth all the thinkering. The rails are clip on and fit snug. They cover the electronics very well…
Here's my pod I made for the DJI O4 Pro Camera and the Quadmula F5 frames. I wanted something as stubby as possible, that still left room for the dual capacitor setup, and required no modifications to the frame. It is locked at 20…
…and another genuine Siren Split F3 accessory. I did not like the floppy antenna mounts and did not want to have loose plugs hanging out of my little toy. So I had to come up with an integrated solution to pack all that stuff into the…
While building my o3 siren sf3 with those P1604, I realized, there are no fitting arm guards. Since I did not rush my build and wanted to craft a quad, that pleases my aesthetics in every aspect it was no question to design my “own” arm…
Most mounts for the Hero11 Mini on the Siren F5 are 25 degrees, so I borrowed a couple files and smooshed them together to make this "masterpiece". Flight (and crash) tested, leaves plenty of space for the battery, balances well, and is…
This STL is for creators to build off of, this is the base mount pattern to fit a Quadmula Siren F5 (full size, not the mini). I will be uploading the full case mount for the GoPro Hero 9/10 in the near future.
Quadmula Siren F5 Series GoPro Bones Mount 25 Degrees W ND Filter Slot. Print in TPU. The ND filter slot works with Black Diamond universal ND filters or similar.
Made a simple but effective fixed 25° mount for the Runcam Thumb pro for use with the SF3. The ‘plate’ was made using the files Quadmula kindly provided, the runcam mount is a model I found somewhere but can't remember where. Works great…
Low profile protective top piece for a Quadmula SirenA if you aren't using an action camera.
Front mount for GPS module (mateksys M10Q) including a rigid washer for secure fastening to the frame. No supports needed on any of the model. Print the mount in TPU and the washers in any rigid material (I used PETG)
This is a 20 degree tilt for the DJI O4 Pro Camera for the Quadmula Siren F3 drone. This adapter may require you to file down the leading edge of your top plate so that the giant camera will fit. I may make a new version allowing the…
I recently built the Quadmula Siren F3 Split and loved the TPU profile spacers (PS-3) for securing the TPU mounts without deforming them so I designed arm guards for the Skyliner MKIII that use them.
This is based on my F5 stack protector, just shortened a little bit to fit the F3/F35 Split
Sideplate for “Quadmula Djinn F25 Split” to keep the dirt out of your flight controller and ESC.
20 degree camera plates for all Quadmulas and the O4 Pro Camera. Use with PS2 spacers. 0.14-0.2 mm layer height recommended with 100% infill. STL is for both plates so no mirroring needed. Plop and print.
Quadmula Siren R5 Caddx Nebula Nano and HDZero Nano 90 Mount Caddx Nebula Nano camera mount 42 and 45 deg HDZero Nano 90 45 deg for 25 and 28 mm standoffs SMA pigtail UFL/SMA holder for SMA stubby antenna Caddx Cherry Vista antenna mount,…
Quadmula Siren R5 45mm Fin, for more easely get back with Turtle Mode
Requires 2x PS-2 2x PS-3 Quadmula Profiles Spacers
These parts are designed to be used with the Quadmula F5S2 frame and are compatable DJI O4 Pro and Flywoo O4 camera upgrade. The VTX holders are intended to be used in combination with either ELRS holder, or the VTX brackets for maximum…
3D print file for QUADMULA Djinn F25 SP *The parts of Djinn F25 SP and Djinn F25 Split are completely incompatible. TPU BlackishGreen - Link
3D print files for the QUADMULA SirenA F35. The TPU used in our official parts has a hardness of 95A. *Please note that some Exclusive TPU Parts are offered exclusively as finished products, so their STL files are not publicly released.…
3D print files for the QUADMULA SirenA F5. The TPU used in our official parts has a hardness of 95A. *Please note that some Exclusive TPU Parts are offered exclusively as finished products, so their STL files are not publicly released.…
Made a simple but effective fixed 25° mount for the Runcam Thumb pro for use with the SF3. The ‘plate’ was made using the files Quadmula kindly provided, the runcam mount is a model I found somewhere but can't remember where. Works great…
The motor guards were printed tilted forward 45 (like a V). Pictured Motors are FPVCycle 22.6mm - 1920kv The Camera mounts were printed bottom up at a 45ish angle too.
i came up with this old school design to adapt the dji 04 to the unbeatable sf5 quadmula frame leeve a like and ill make more
I wanted to mount the new O4 Air Unit (Lite, not Pro, there are plenty of options for mounting a Pro) onto my Quadmula Siren F3.5. Unfortunately it was already at 250grams with an analog camera and an o4 Pro would have pushed it over…
customized these camera plates to work with siren f5 mini, few degrees of tilt! no need to shave your frame,this is perfect for converting your quadmula siren f5 mini to dji 04 camera
This little piece will save you from ruining your bottom plate, since the djinn isn't a true x frame the back plate hits the ground first when you say….do a matty or any other trick like so,"This is a must" if this helps do me a favor and…
i made this to mount the bumper to my f3.5 siren. made for m2 counter sunk screw.
This custom 3D-printed mount reorients the RadioMaster RP1 V2 antenna by 90°, positioning it vertically to enhance build cleanliness and signal performance. The vertical alignment aligns with the antenna's optimal radiation pattern,…
for protecting the battery pig tail when routing it forwarded PRINTING INSTRUCTIONS 0.4mm nozzle 0.2mm layer height flexible filament Half Grommet can be printed standing up with out supports
3D print files for the QUADMULA SirenA F5. The TPU used in our official parts has a hardness of 95A. *Please note that some Exclusive TPU Parts are offered exclusively as finished products, so their STL files are not publicly released.…
This set of files is for the Quadmula F25 SP. This set of files is intended to compliment the Quadmula arm guards, and camera cages. All components are official WingSmith designs. Please provide feedback for requests and changes for…
This mounts in place of action cam mount to protect your battery in front impacts and help self right in turtle mode. Print in TPU
SMA Antenna and Receiver Antenna Mount for Quadmula Siren F3 Since Quadmula only gives out TBS SMA antenna mount TPU parts, I've decided to design and test out my own. The optional TPU part from Quadmula doesn't even fit the slimmest SMA…
I remixed the mount that I used to use on my MKIII that fit the gopro really well.
