Quadmula Siren F5 Split Stack Protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A snap-on solution to protect the FC stack on your flying wood chipper. Print in ABS, not tested with other filaments.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 728
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is fitted for my setup (see pic), with dual capacitors in the front with the stock holder printed at 150% Z, and a Vifly Finder 2 mounted in the second single capacitor holder. Let me know if you need a dimension tweaked for however you like to set up your quad, otherwise I have included the STEP file for easy modifications.
Designed with ABS in mind, may not snap on and off as well with PETG, or at all with PLA. Don't print this in TPU, or you're going to have a bad time.
Not licensed for sale commercially without prior agreement.