1 / 1
Bike Beer Clip for 12oz, 355ml, and 330ml Cans — zdjęcie 1

Bike Beer Clip for 12oz, 355ml, and 330ml Cans

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holds most 12oz/355ml cans and mounts to your bike's water bottle cage. Includes STEP/F3D files for remixing!

Ocena
4,7 / 5
Polubienia
106
Pobrania
919
Wydruki
12
Wyświetlenia
4233
Oceny
10

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Inspired by this design. I didn't like the latching mechanism and it was very hard to print due to some poorly designed internal overhangs, so I decided to redesign it. My design leans more into the spring force of the clip to hold the can in place, but it seems to work well enough. I'll admit it's not as sleek as the original but I've included the source files if you want to remix it.
 

Print Settings


Print it on either long side (so the zip tie holes are oriented vertically). No supports. I recommend PETG or possibly ABS/ASA.

Tagi