Minicaster humbucker/Double Coil neck
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I added a cut out for fitting a double coil pickup into the neck.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 661
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
I remixed the neck piece and pickguard to fit a humbucker inside.
The humbucker i used is a Guitar Tech branded one which came with an encore les paul so yours might not fit.
As long as yours is 70mm x 30mm it should fit.
The pickguard is a little thin in one place and did snap when i was making holes for the humbucker but as a retention screw is in that corner it works perfectly fine and holds the pickup without it shifting
I didn't add holes for mounting the pickup into the pickguard just incase the spacing is different.
I used 25% infill with 7 parameters as this is what I used for the original neck piece and it worked just fine
I am including my f3d file incase you want to adjust it to fit your humbucker.