Jug/Scoop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed with a flat front for better scooping abilities.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 153
- Wydruki
- 1
- Wyświetlenia
- 725
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
The model was actually designed to scoop water out of the bath for a more economical toilet flush but I'm sure it could be used for many other uses like a lego scoop for example.
I printed this in pla but naturally it would perhaps be stronger in ABS/ASA.
It was also designed to be printed with 4 perimeters at 0.6mm nozzle width. I used a .4mm cht nozzle and just changed the line width in cura to 0.6.
You could also increase the wall line count beyond 4 if you want a nice strong handle.
As for supports you could possibly print this with zero supports but I added tree supports to the top(underside) of the handle to be safe.
Fits on a 180x180 bed, height however is 200mm