Jug/Scoop
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed with a flat front for better scooping abilities.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 153
- Makes
- 1
- Views
- 725
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
The model was actually designed to scoop water out of the bath for a more economical toilet flush but I'm sure it could be used for many other uses like a lego scoop for example.
I printed this in pla but naturally it would perhaps be stronger in ABS/ASA.
It was also designed to be printed with 4 perimeters at 0.6mm nozzle width. I used a .4mm cht nozzle and just changed the line width in cura to 0.6.
You could also increase the wall line count beyond 4 if you want a nice strong handle.
As for supports you could possibly print this with zero supports but I added tree supports to the top(underside) of the handle to be safe.
Fits on a 180x180 bed, height however is 200mm