1 / 3
VORON V0.2 Rear Skirt with USB and LAN Port
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I want use the LAN from Raspberry Pi an an Service USB Port .. but i dont want to remove the backpanel
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 144
- Wydruki
- 4
- Wyświetlenia
- 1224
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 4) (Komentarze: 5)Remiksy (1)Kolekcje (59)Powiązane
I want use the LAN from Raspberry Pi an an Service USB Port .. but i dont want to remove the backpanel
use v2 !!!
v1 has in my voron not enough space because of the 5V buck converter and the Z stepper motor .. if you think it works for you .. try it ;-) but be warned ;-)
you have to flip the model with the slicer and activate support …
i used the adapter from aliexpress .. ( Straight-0.3m is a good option :)
this should fit too and are much faster at home :-)
(affinity links)