Low Poly 3DConnexion SpaceNavigator Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dust cover for the 3DConnexion SpaceNavigator, now in a stylish, low-poly design.
- Ocena
- 4,667 / 5
- Polubienia
- 11
- Pobrania
- 53
- Wydruki
- 2
- Wyświetlenia
- 606
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
In a case of form taking the upper hand on function, I present this "low poly" 3DConnexion SpaceNavigator cover.
I wanted to do something more creative for the cover than my previous design. I had this idea that it should look somewhat irregular, but highly geometric, like a crystal. I was also inspired by the blue LEDs on the device and some translucent filament I had on hand. So I wanted to bring all that together.
To be fair this is not really a low poly design, there's actually a lot of polys here, but the overall effect came out looking primitive and geometric. I even spent some time picking an infill that complemented the design. The triangular infill at 5% density gives an affect that somewhat resembles cracks in a natural material.
If you print it, share a picture. I'm curious how it will look in different colors.
Print instructions
Sliced for and printed in PETG.
I intended this to be able to print without supports when printed upside down. I also used the Triangle infill at 5% to minimize additional material while still providing a modicum of support.