SBox & SBox Mini Axis Pin Cutting Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jig to measure out 3mm metal axis before cutting
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 149
- Wydruki
- 1
- Wyświetlenia
- 675
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
SBox & SBox Mini call for several metal axis of various lengths. This jig will help measure and identify where to cut 2.8 - 3mm rod.
Lengths are 39mm, 36mm, 26mm, 24mm, & 22mm.
Just insert rod and cut a front face - I used a Dremel cutting wheel. Afterwards used Dremel Sanding Disc to smooth the freshly cut pin edges.
Original design did not include 22mm length - it is now added even though the picture show the 1st version with 4 lengths.
When printing the 1st version - filament swap did not go smoothly due to operator error and the text did not print in another color but Jig was still useable so didn't bother to reprint.