Spinning thread holder (and hoop) for brother embroidery machine SE600
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
my brother embroidery machine (the SE600) does not have a stand/space to hold large thread which is quite troublesome,…
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 1122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
my brother embroidery machine (the SE600) does not have a stand/space to hold large thread which is quite troublesome, so I made one.
You will need to glue a ball bearing wheel so that it can spin freely. I got the bearing from an old fidget spinner so I am not sure what's the model number, but the bearing outside diameter is 22mm and inner hole is 8mm, should be easy to find.
Print the base with slicing tolerance set to exclusive for an easier fit.
Attach the base to the top of the machine with double side acrylic tape.
Also including is a inner hoop for the machine because my original hoop is broken.
Category: Art Tools