Spinning thread holder (and hoop) for brother embroidery machine SE600
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
my brother embroidery machine (the SE600) does not have a stand/space to hold large thread which is quite troublesome,…
- Rating
- 0 / 5
- Likes
- 30
- Downloads
- 81
- Makes
- 0
- Views
- 1,128
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
my brother embroidery machine (the SE600) does not have a stand/space to hold large thread which is quite troublesome, so I made one.
You will need to glue a ball bearing wheel so that it can spin freely. I got the bearing from an old fidget spinner so I am not sure what's the model number, but the bearing outside diameter is 22mm and inner hole is 8mm, should be easy to find.
Print the base with slicing tolerance set to exclusive for an easier fit.
Attach the base to the top of the machine with double side acrylic tape.
Also including is a inner hoop for the machine because my original hoop is broken.
Category: Art Tools