1 / 4
Flexible Shovel for hard to reach places!
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a quick print I designed to reach an awkward spot to clean on my oven and fireplace.
- Ocena
- 4 / 5
- Polubienia
- 2
- Pobrania
- 39
- Wydruki
- 1
- Wyświetlenia
- 230
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
This is a quick print I designed to reach an awkward spot to clean on my oven and fireplace, It was too long to print in 2 pieces, so I added a finger joint.
I welded this together with a piece of PLA and a soldering iron set to 220-240 degrees. This means the shovel is flexible in the middle, allowing you to bend it into openings 5mm in height.
Printed at 0.2mm layer height, should take 1 hour.