Lynx (Axe) Body Spray Caddy/Air Freshener Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Caddy to house a standard 150ml Lynx Deodorant Can (I presume this will also apply to Axe cans)
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 476
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
At the minute I've found a small shim is required to stop any rotation - please bear this in mind until I publish an update! I recommend using a piece of your support from the cap.
I have tons of Lynx bodyspray from Christmas Giftsets over the years, which I'm sure a lot of people can relate to.
The thing is, I don't use it. Shower gel? Cool, Lynx body spray? Not gonna get used (disclaimer, I do use anti-perspirant, just not Lynx)
However, I don't want to waste it. So I thought ‘where am I happy using Lynx?’, and the answer was: the bathroom, as an air freshener. But that led to a new problem, I don't want to just sit a can of Lynx in the bathroom, it doesn't really give air freshener vibes.
And now we're here, with a sleek design that is bathroom-approved!
I can't upload my AnkerSlicer GCODE as it shows as corrupt, but the body is printed on ‘Easy’ mode at 10x speed (Fast), 0.3mm layer height, 0.4mm nozzle, 20% infill. No support required.
Cap I believe was printed at 0.2mm layer height, ironing on top layer, printed upright with supports.
All in roughly a 2 hour print on AnkerMake M5.