Din Rail Mount for Sparkfun Modules using M3 screws
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You will need to print a retaining tabs, which can be found at: https://www.thingiverse.com/thing:3401942 or…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 485
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
You will need to print a retaining tabs, which can be found at:
https://www.thingiverse.com/thing:3401942 or
https://www.prusaprinters.org/prints/8512-din-rail-mounting-tab
An Din Rail mount for up to four Sparkfun Qwiic modules using M3 screws. This is for a more permanent usage.
This design can mount two of the two hole variety with two of the four hole models or up to four of the four hole modules. The double set of screw holes in the last position allows for hanging a module off the end so that through hole components do not interfere with the board mounting.
Print instructions
Unassociated tags: Din rail, Din Rail mount
Category: Electronics Summary
You will need to print two retaining tabs, which can be found at:
https://www.thingiverse.com/thing:3401942
An Din Rail mount for up to four Sparkfun Qwiic modules using M3 screws. This is for a more permanent usage.
This design can mount two of the two hole variety with two of the four hole models or up to four of the four hole modules. The double set of screw holes in the last position allows for hanging a module off the end so that through hole components do not interfere with the board mounting.
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: Yes
Infill: 25%
Filament: generic pla pla Black