1 / 5
Air Hat 5.2 5.9 ZJ Jeep Dodge Holley throttle body — zdjęcie 1
1 / 5

Air Hat 5.2 5.9 ZJ Jeep Dodge Holley throttle body

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Air intake/throttle body hat for Jeep Grand Cherokee ZJ/ZG with a 5.9 Liter or 5.2 liter engine. Fit stock hood.

Ocena
0 / 5
Polubienia
27
Pobrania
163
Wydruki
0
Wyświetlenia
1359
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

Polycarbonate or good PETG should handle the heat unless you live in the desert maybe?. May be some other filaments for higher heat applications but I used Priline CFPC at 260c @40mm/s in an enclosed chamber of 120f on an Ender 3v2

DO NOT USE PLA or low temp filaments for this print!!

Hat prints TOP DOWN with tree supports only on bed, 65% overhang should make it support the opening but not the ring. I I used 100% infill and 5 walls.

The tube needs a 5-8 mm brim and prints standing up. same settings as the Hat but really it's like 4 walls all the way up with no supports needed.

Glue together with super glue or something similar after it's fitted. The preferred choice would be Methyl Methacrylate based glues for polycarbonate, but CA glue has held well for me.

Tagi