1 / 3
Ecoheater bracket — zdjęcie 1
1 / 3

Ecoheater bracket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement bracket for Ecoheater

Ocena
0 / 5
Polubienia
2
Pobrania
11
Wydruki
0
Wyświetlenia
101
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I managed to brake the rather fragile bracket for my Ecoheater that I use to keep my shed warm so I did what any 3D Printer owner would do, design something better.

This is much chunkier than the original brackets but I designed it to use the original screws of the supplied brackets. 

Make sure you print it in something like ABS or ASA so it can withstand the temperature of the heater. Printed mine in ASA and I've had no issues (tested it with the heater on full blast for a few hours)

Tagi