Anycubic Kobra Go/Neo PTFE Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PTFE Adapter for Anycubic Kobra Go/Neo printers
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 287
- Wydruki
- 4
- Wyświetlenia
- 1589
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I got the end off a model I found somewhere but can't remember where. (Sorry)
Since I wanted to run a PTFE tube from my Sunlu dryer to the printer, I made this adapter. It uses the M10 size threaded adapter. I feed the tube all the way through so the filament won't catch coming out the bottom.
The frame is extra thick and will help eliminate the chance of PLA warping over time. This clips on hard and doesn't move easily which is nice.
Print Information
Material: PLA+ (or whatever you want to use)
Rafts: No
Supports: Yes (just watch the threads)
Layer Resolution: 0.2mm to 0.3mm (I printed on 0.2mm and it was fine.)
Infill: Grid at 25-50%