Simple Fish Portal
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple floating fish portal that keeps debris away from the center so you can more easily feed your fish. 4 sizes.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 145
- Wydruki
- 0
- Wyświetlenia
- 808
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My sibling asked if I could make a floating device that will keep vegetation away from the center so I designed this which is simple but surprisingly stylish.
If you want a fish-shaped version I have an upload here:
https://www.printables.com/model/462913-fishy-fish-portal
the sizes are measured from inside diameter and you can choose from 40mm, 60mm, 80mm and 100mm. or print them all with the 4-pack STL.
A very easy print. nozzle size doesn't matter but keep infill at 10-20% to make it float.
A very simple design made to keep debris away from the center so you can feed your fish easier if you have surface dwelling plants or other debris.
Has been tested by my sibling who has fish for about a month without issues.
leave a like/make if you found it useful and check out my other designs :)
if you like my work, consider donating :)
https://ko-fi.com/jobis