Magnetic PTFE Adapter for Prusa MK3(s+)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement part for the right Z-axis cover with magnetic PTFE Coupler
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 664
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Based on the original model of the Prusa MK3s+ (probably all MK3) right hand side Z covers and the magnetic PTFE coupler from Line Arc Line.
The Details
As I have a magnetically coupled bowden setup on the extruder, which was feeding to a fixed M10 adapter on the right upper end of the Z axis, I wanted to be able to quickly decouple both ends of the bowden tube. This should fix that.
I used the original coupler model, removed the threading for the M10 coupler (because I want to feed the filament directly), joined the model to the original printed part of the printer and made the model look a bit more cohesive. The one on the photos is my first iteration but I made two others - “edgy” and “blocky”. Functionally identical, it's just the design.
The Parts are designed and tested on my MK3s+, but as there are no Z holders in the BOM for the upgrade from MK3 and MK3s, I'd assume it works there just as well.
Note:
There are multiple versions of the original coupler. This will only fit with the “vanilla” version (no innie/outie) with three magnets!