Earmuffs (cold or noise protection) / Klapky na uši
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Unisex cold-weather thermal earmuffs. Easy to print. On the top of nuts you can use almost any logo. No glue needed!
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 908
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Unisex cold-weather thermal earmuffs. Easy to print. On the top of nuts you can use almost any logo.
No glue needed! Used only 3D printed threads.
All you need is a little fabric (for example from new winter socks or an old sweater etc.), scissors, stitching thread, needle and a piece of soft foam.
Assembly instructions in the gallery.
Print instructions
Only the outer part needs a little support, otherwise bridging is not a problem. See .3mf files.
For the headband and outer parts you can use layer height up to 0,3mm.
Recommended layer height for inner parts and nuts is 0,2mm.