Earmuffs (cold or noise protection) / Klapky na uši
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Unisex cold-weather thermal earmuffs. Easy to print. On the top of nuts you can use almost any logo. No glue needed!
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 70
- Makes
- 0
- Views
- 903
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Unisex cold-weather thermal earmuffs. Easy to print. On the top of nuts you can use almost any logo.
No glue needed! Used only 3D printed threads.
All you need is a little fabric (for example from new winter socks or an old sweater etc.), scissors, stitching thread, needle and a piece of soft foam.
Assembly instructions in the gallery.
Print instructions
Only the outer part needs a little support, otherwise bridging is not a problem. See .3mf files.
For the headband and outer parts you can use layer height up to 0,3mm.
Recommended layer height for inner parts and nuts is 0,2mm.