1 / 2
90º Exhaust Fan Elbow for Bambu Lab X1 or X1C — zdjęcie 1
1 / 2

90º Exhaust Fan Elbow for Bambu Lab X1 or X1C

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple 90º elbow for X1 or X1C exhaust fan to attach a 3” dryer hose. Can be mounted to vent either left or right.

Ocena
0 / 5
Polubienia
22
Pobrania
106
Wydruki
1
Wyświetlenia
1165
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Needed to vent fumes outside when printing with ABS while minimizing bulk behind the machine and run the hose behind a desk to reach the window unseen. Simple 90º elbow for X1 or X1C exhaust fan to attach a 3” dryer hose and standard hose clamp. Can be mounted to vent either left or right, using double-sided tape. Footprint as minimal as possible to allow attachment to mount solely to the back panel and not overlap with side panel edge, so it can stay attached even if the back of the machine needs to be removed for maintenance (without having to remove side panel as well) just make sure to remove the screw first. 

Printed in ABS for heat resistance. 

Tagi