Heavy Duty 7" Raspberry Pi Touch Display Pole Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A heavy duty pole mount for the 7" Raspberry Pi touch display that doesn't wobble when you touch it.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 571
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A heavy duty mount for the Raspberry Pi touchscreen that doesn't wobble when you touch it. Made to mount on a 25mm pole. Mine is mounted on a Seville classic Ultradurable wire shelf.
This version works great and I've been using it for a good year. At some point I'd like to update the design to use a latch mechanism that clamps down on the pole for a final tightening vs using a bolt to tighten it down. Included the step file as well to make it easy to modify for different pole diameters.
Parts Needed:
- 1 x M4 threaded insert
- 1 x Long M4 bolt to attach the mount together
- Use a lock washer to keep the bolt from loosening when adjusting the mount
- 4 x Short M3 bolts for mounting the touch display
- 1 x Long M3 or M4 bolt, washer and nut to clamp the mount tight on the pole
My print settings:
- .6mm nozzle
- .4mm layer height
- 6 perimeters
- 25% infill
- No supports needed