Dahua VTO2202F Mounting Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting Box for Dahua DHI-VTO2202F-P-S2
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 434
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
Recently, I purchased a Dahua video doorbell, but it didn't come with a mounting box. Not wanting to spend over $20 for one, I decided to design and create one myself. The box I designed has M4 screw holes on the back, which are spaced 60mm apart, enabling it to be mounted on a standard 86mm electronic box. You will also require two M3*10 round head screws to secure the doorbell inside the box.
I printed this without support, using Polymaker PA612-CF filament to withstand the heat from the doorbell and the sun. If you intend to use it outdoors, it's recommended to print it with ASA filament.