Untie The Ring And Marry Me
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The goal of this puzzle is to remove the thinnest ring from within strings.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 1
- Wyświetlenia
- 259
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial
The goal of this puzzle is to remove the thinnest ring from within strings.
You'll need:
- Instant glue to attach the strings to the 3D print
- 2 pieces of string (maximum thickness: 5mm):
- 1 piece measuring 25cm
- 1 piece measuring 10cm
Note: the measures of the strings must be respected to successfully solve the puzzle.
Instructions for assembly (follow the pictures):
- Glue the ends of the shorter string into the holes in each of the two wider rings.
- Place the two rings on the base pin and glue the sphere to the pin.
- Pass the longer string through the shorter string and insert the thinner ring inside it.
- Glue the two ends of the longer string into the holes in the base.
There is no trick. There is a logic to removing the thinnest ring without forcing or breaking any pieces. The same logic in reverse puts the ring back on the string again.
Print Settings
- Rafts: No
- Supports: No
- Resolution: 0.32
- Infill: 10%
You can help me buy a beer! :)
Any amount would make me happy and extremely grateful.
PayPal: https://paypal.me/maurymmarques
Patreon: https://patreon.com/maurymmarques