Untie The Ring And Marry Me
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The goal of this puzzle is to remove the thinnest ring from within strings.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 17
- Makes
- 1
- Views
- 259
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution — Noncommercial
The goal of this puzzle is to remove the thinnest ring from within strings.
You'll need:
- Instant glue to attach the strings to the 3D print
- 2 pieces of string (maximum thickness: 5mm):
- 1 piece measuring 25cm
- 1 piece measuring 10cm
Note: the measures of the strings must be respected to successfully solve the puzzle.
Instructions for assembly (follow the pictures):
- Glue the ends of the shorter string into the holes in each of the two wider rings.
- Place the two rings on the base pin and glue the sphere to the pin.
- Pass the longer string through the shorter string and insert the thinner ring inside it.
- Glue the two ends of the longer string into the holes in the base.
There is no trick. There is a logic to removing the thinnest ring without forcing or breaking any pieces. The same logic in reverse puts the ring back on the string again.
Print Settings
- Rafts: No
- Supports: No
- Resolution: 0.32
- Infill: 10%
You can help me buy a beer! :)
Any amount would make me happy and extremely grateful.
PayPal: https://paypal.me/maurymmarques
Patreon: https://patreon.com/maurymmarques