Adaptation of TV mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is just an adaptation for a metal TV mount.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 311
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of Vesa 100x100 Screen Wall Mount (rotate) by Paul Marsch
This is just an adaptation for a metal TV mount. The metal mount that was supposed to fit on my TV was too big and would cover the video inputs.
You can print it with your favorite settings, but be careful of the infill and resistance of the material - it needs to resist the weight of your TV.
(I set 75% infill in the entire piece and 100% infill in the screw regions to withstand the tightening pressure)
Print Settings
- Rafts: No
- Supports: No
- Resolution: 0.2
- Infill: At least 75%
- Filament: Any PLA, PETG, ABS or Nylon
You can help me buy a beer! :)
Any amount would make me happy and extremely grateful.
PayPal: https://paypal.me/maurymmarques
Patreon: https://patreon.com/maurymmarques