Go Fetch! Ball Chucker (stronger arm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix. I made the arm stronger and split it to be printed on 220mm x 220mm size printers.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 66
- Wydruki
- 1
- Wyświetlenia
- 483
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Share Alike
This is a remix of Go Fetch! Ball Chucker by Patrick Gaston
I made the arm stronger and split it to be printed on 220mm x 220mm size printers (you need to use glue to stick the parts together tightly).
You can print it with your favorite settings.
Print Settings
- Rafts: No
- Supports: Yes
- Resolution: 0.28 or 0.32
- Infill: 30%
- Filament: Any PETG or ABS
Notes:
I printed it using (ABS for the arm and PETG for the chucker) 30% infill with the triangle pattern. I didn't try to print it using PLA but I think it would work well too.
You can help me buy a beer! :)
Any amount would make me happy and extremely grateful.
PayPal: https://paypal.me/maurymmarques
Patreon: https://patreon.com/maurymmarques