1 / 1
Bag Clip (PRINT IN PLACE CAM) - 6x3 magnet remix — zdjęcie 1

Bag Clip (PRINT IN PLACE CAM) - 6x3 magnet remix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of Andrei's bag clip to add a small recess for 6x3 magnets.

Ocena
5 / 5
Polubienia
15
Pobrania
88
Wydruki
1
Wyświetlenia
648
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
GNU General Public License v3.0

Remix of Andrei's bag clip to add a small recess for 6x3 magnets. No other modifications.

I didn't see an existing remix and wanted a simple storage solution for these clips. Took inspiration from a remix of the dino clip remix and added the spot to this version. Recess is 6.15mm x 6.15mm x 3.5mm so the magnet will fit tight, no glue needed but will be a very tight fit. A small rubber mallet will get the magnet in snugly without much effort.

Printed at 0.16mm layer height with a 0.4mm nozzle. 4-5 perimeters and 20-25% infill of your choice. Hinge needs build plate supports only, otherwise prints in place. Recommend paint on supports for easy removal.

Published under GPL v3, same as the original model.

Tagi