Diatone white sheep landing gear adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a adapter for the Diatone White Sheep frame so that you can use the F450/F550 Landing gear, and mount your…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a adapter for the Diatone White Sheep frame so that you can use the F450/F550 Landing gear, and mount your gimbal under the frame insted.
The adapter is using 4 holes in the DWS frame, see picture. And the landing gear will go in to the holes in the adapter.
Attach the landing gear on the adapterplate. You will have to remove the legs from the two rods so its easier to screw the plate on to the frame.
EDIT: V2 is 4mm screws for the gears, and some other adjustments, This works better than V1 in most cases.
Print instructions
Unassociated tags: landing gear
Category: R/C Vehicles Summary
This is a adapter for the Diatone White Sheep frame so that you can use the F450/F550 Landing gear, and mount your gimbal under the frame insted.
The adapter is using 4 holes in the DWS frame, see picture. And the landing gear will go in to the holes in the adapter.
Attach the landing gear on the adapterplate. You will have to remove the legs from the two rods so its easier to screw the plate on to the frame.
EDIT: V2 is 4mm screws for the gears, and some other adjustments, This works better than V1 in most cases.
Print Settings
Printer: Da Vinci 1.0A e3d v6 repetier
Rafts: No
Supports: No
Resolution: 0.2
Infill: 30%