Resin print dryer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick way to dry your resin print after IPA wash.
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 114
- Wydruki
- 1
- Wyświetlenia
- 866
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I don't know about you but I don't like to wait for my resin print to dry after the IPA (isopropyl alcohol) wash so I designed this fan to quickly dry off the IPA from the resin so I can cure it in the anycubic UV chamber. I noticed the fan cover I got on amazon was restricting the air flow a bit so I made a plastic version that seems quite a bit better but ill leave it up to you.
The 120mm fan I used was bought on amazon: https://a.co/d/iiGIpe4
The 140mm fan cover option 2 is on amazon: https://a.co/d/bAD5ACT
I printed in PLA and for the feet I used TPU filament.
Infill: doesn't matter (I used 30%)
Supports: none
Layer Height: doesn't matter (I used .18)
Raft: none
notes: "be careful removing fan bottom from build plate as the walls are thin and can snap or bend."