Resin print dryer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Quick way to dry your resin print after IPA wash.
- Rating
- 5 / 5
- Likes
- 36
- Downloads
- 114
- Makes
- 1
- Views
- 866
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I don't know about you but I don't like to wait for my resin print to dry after the IPA (isopropyl alcohol) wash so I designed this fan to quickly dry off the IPA from the resin so I can cure it in the anycubic UV chamber. I noticed the fan cover I got on amazon was restricting the air flow a bit so I made a plastic version that seems quite a bit better but ill leave it up to you.
The 120mm fan I used was bought on amazon: https://a.co/d/iiGIpe4
The 140mm fan cover option 2 is on amazon: https://a.co/d/bAD5ACT
I printed in PLA and for the feet I used TPU filament.
Infill: doesn't matter (I used 30%)
Supports: none
Layer Height: doesn't matter (I used .18)
Raft: none
notes: "be careful removing fan bottom from build plate as the walls are thin and can snap or bend."