1 / 3
Benchy in magnetic levitation with an anchor
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You need two 12mm diameter magnets
- Ocena
- 5 / 5
- Polubienia
- 178
- Pobrania
- 223
- Wydruki
- 2
- Wyświetlenia
- 2949
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 5)Remiksy (0)Kolekcje (176)Powiązane
Print Benchy at 120% so that the 12 x 10 mm diameter neodymium magnet goes through the front window.
If you have a 10mm diameter magnet you can print all my parts at 85% and the benchy at 100%.
You also need sewing or fishing thread that you pass through the holes provided for this purpose.
Benchy : https://www.printables.com/fr/model/3161-3d-benchy
Thanks for sharing your creations.
