1 / 3
Benchy in magnetic levitation with an anchor
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
You need two 12mm diameter magnets
- Rating
- 5 / 5
- Likes
- 178
- Downloads
- 223
- Makes
- 2
- Views
- 2,949
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print Benchy at 120% so that the 12 x 10 mm diameter neodymium magnet goes through the front window.
If you have a 10mm diameter magnet you can print all my parts at 85% and the benchy at 100%.
You also need sewing or fishing thread that you pass through the holes provided for this purpose.
Benchy : https://www.printables.com/fr/model/3161-3d-benchy
Thanks for sharing your creations.
