Counting matching models…
A simple v6 cooler. Can hold a can in each “cylinder” and one in the ice chamber. Plenty of space in the middle for sandwiches, and about 7lbs of ice. I designed a V8 version for my dad but it could only use narrow cans to fit on my…
the colored images are a render with a texture, the model itself is one color.
Just a really cool axolotl. And their sibling the less cool axolotle. (With and withotu sunglasses)
This is a print-in-place rectangular slot wheel. There's also a peg with the same slot, to make the other side of the bin the same height without requiring 4 wheels. I am not releasing a version of the wheel that does not say “WHEEEEE” on…
This is a custom cover to replace the AIO cover of the CoolerMaster Master Liquid ML360R. This was my first print of the model so the infill wasn't set properly. Probably higher infill will prevent the light from bleeding through the print.
bc250 to amd cpu cooler mount recommend to print in ABS. damage may occur from melting if not printed in abs. PETG may work, but I would not recommend it. do NOT print with supports, as it will fill in the mounting holes! recommended to…
This is the full documentation for building a tractor with the PolyBriX construction kit. This project only provides the STLs with all the required parts and the detailed assembly instructions. The individual parts can be downloaded form…
The stepper motor drivers on my Qidi X-Plus 4 were reaching temperatures of up to 100°C. I mounted a 40mm x 40mm radial fan with a 3D printed mount. This reduced the temperatures by around 30-40°C. You will need a 40mm x 40mm radial fan…
Bracket you can use to mount your cooler to your boat.
requires 4 4mm heat set inserts to mount the 120mm fan and 4 15mm m3 standoffs between the block and the printed part. Longer standoffs would be fine, but 15mm is the minimum. attach the printed part to the standoff with 10mm m3 bolts and…
First: This is not my work, this is the work of the amazing Mangomoose, the the guy who made Big Mac (if you've been to Open Sauce 2024 or VCF West 2024, you know what I'm talking about. It's a really, really big Mac Plus made out of 3D…
The Mastercool pumps have an exhaust vent that doesn't allow any attachments. When I was drawing a vacuum on large chambers the pump was filling my garage with mist. I tried sponge filters, duct taping filters on, and nothing was working…
This is a specially designed 360 degree cooling system for the Artillery Sidewinder X2 (fan duct geometry inspired by the MK4S @Prusa3d). It is not a scale down copy of the MK4S version. This mod uses the original 5015 fan - I recommend…
I created this fin to redirect the hot air coming out of the back of the laptop and prevent it from being recirculated back into the laptop. The cable holder is optional. It might work with other laptops as well.
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
This 3D-printed spacer block is meticulously designed to adapt the Tapcooler Nanocanner for compatibility with the BenchMK Drill-Powered Can Seamer. Engineered for precision, it provides a secure and accurate fit, improving both the…
120mm auxiliary part cooling fan designed for a ZeroG Mercury One.1 370 (Non-Hydra) that may also work for Ender 5 and 5+'s. The ducts have optional heat set inserts for strength. You need to close the holes if you don't use the inserts.…
Primo bottled water is a great option for water at a campground without potable water, especially in combination with a pump. The water container is big, robust and easy to carry. Primo White Water Cooler Pump (at Lowes) I wanted to be…
Necessary equipment for longer RC expeditions. Not cooling. Maybe next time. You will need (8) M2*5 (2) Hinges 8x10mm ( https://www.aliexpress.com/item/1005005574915000.html ) UPDATES 2025-03-09 - FridgeS_bottom_v2 - Added holes for…
I'd printed a few other fly trap models, such as the ones designed for a soft drink bottle. While they work pretty well, they all had the same problem: they're not big enough! I live in a rural area where the flies can get pretty crazy,…
This a new 5015 intake for the delta P duct v2r22 addon with a cone airflow entry. Did not like like the existing ones very much so I made this. On a bench test the inside cone improves cooling airflow by 3-8% (depending on cooler speed).…
This is a laptop cooler stand that you can parametrize to your needs. The design was inspired by Carlo Franciscone's laptop cooler stand on Thingiverse. Since we wanted a larger and inclined version we took some time after work to create…
This is a mod to allow CPAP cooling with the Calamity Toolhead, featuring a new duct design optimized for CPAP. If using in an enclosure, make sure you print this out of something like ABS or ASA! Print Settings Infill: 40% Walls: 5…
Cool s/ s thing art piece. There are 2 versions, regular and one with detail. Do a color change in prusaslicer to change top layer. If you like my designs and would like to see more please consider donating/tipping.
For all of you who might feel that your stock TEVO tarantula's hot end is inadequate in that it doesn't have a part cooling fan nor a mount for an inductive sensor, than these parts are for you. The fan vent holds a 5015 fan and provides…
This is a part cooler for the E3d Chimera or Chimera+ hotend. It clamps between the heatsink and the fan. Separate versions are provided for the Chimera and the Chimera+, as they have slightly different dimensions. I only have the…
Most 5015 part coolers are for a specific printer's carriage. This one simply piggybacks on the 30mm fan of an E3Dv6. In the second picture above, you will see 2 of these printed with the exact same settings. One with this installed and…
Tested on my DDR5 setup with 4 RAM Sticks and the RAM temperature was reduced by 6-8 degrees C. Includes two models, one is combined, and the other offers capability to separately print the cover (in case you want to print the cover with…
This mounting system for the Coolermaster Qube 500 enables secure attachment to the side panel of a desk. Once the brackets are fixed to the desk structure, the case can be frontally extracted without the need for tools, allowing for easy…
Supports: not needed Nozzle: 0.4mm Layer Height: 0.2mm Material: PETG or better heat resistant material (PLA not recommended) You need 4pcs M3x8 counterunk screws to mount the tabs to the adapter. You need 4pcs rubber anti vibration pads…
Ive modificate the clip for BootyCall Jones linear carriage und useable for heat inserts M3x4x5mm. The duct also got a heat insert. Print settings up to you. Ive used 10% infill with ABS.
This is a sign that says cool beans. It is used for a middle school classroom project. It is recommended to print with multicolor.
This 3D model is a custom-designed top cover/faceplate for the Deepcool AG400 and AG400 MAX CPU air coolers. It fits securely over the top of the heatsink while maintaining full airflow and fan performance. Features: Precision-fit…
Meet this adorable, smiling caterpillar pulling a rustic little wagon planter! This charming design features a cheerful caterpillar wearing a baseball cap and wrapped in a rope, hauling a flower pot on wheels. It’s a playful and…
My triple slot GPU was running a bit hot on the NR400 despite having 3 intake fans installed, so I made this to improve the airflow to my GPU by mounting it right behind the fans on the front of the case, on top of the hard drive cage on…
The AirCowl is a 3D printable personal cooling system that transforms a standard PC fan into a comfortable, wearable neck cooler. Perfect for hot summer days, outdoor work, or anyone who runs warm, this innovative design provides targeted…
we can all agree, for many of us right now… it's hot as Balls.. and well, my balls are hot. WFH or just in for a gaming session, with your 5090 pumping out the heat of a 1000's suns. I needed something to keep the crown jewels from…
This case is for Raspberry Pi 5 with Geekworm X1001 (PCIe to NVMe), Geekworm H505 (active cooler), 2280 disk and NVMe passive cooler (i.e. ThermalrightTR-M.2-2280). Requires 4x M2.5x6 Print Layer height: 0.2mm Infill: rectilinear 10%…
Have you ever wished for a more personal summer breeze…? This cheeky but effective little project repurposes your leftover print fan from the MK4/MK3.9 to MK4S/MK3.9S upgrade and channels airflow right where it’s needed most. Designed to…
This is a remix of the original snap fit case bottom as well as the version of the top made for the Armor Lite V5 heatsink. This remix is based on the V3.1 case. I printed this with Sunlu transparent PLA with the 0.25mm Structural…
Fortnite line art Peely - print face down - paintable in the slicer
Designed keeping the corsair logo in mind.. Inspired by waves so every pc sails through every game and task.
The headprint was improved from last project as https://www.printables.com/model/1015224-xxx-3-fans-print-head-for-anycubic-kobra-2-series By 1. To change position of Model attached to Heat Sink that easily more last model 2. To add LED…
Print in PLA/PTG. The top extrusion is 100mm The small piece is 30mm The Part with the 3 holes is for adding ¼ 20 accessory thread, designed to be used with a ¼ 20 5mm insert and two m4 10m countersunk screws and T nuts.
My capswap adaptation for the Corsair TITAN AIO. Features a design inspired by the classic look of Corsair hardware, complete with the older logo.
This is a simple leg for HATRON HCP130 laptop cooling pad. i think you can use this for other brands that exactly are same with HCP130 the difference is just brand names.
A model of the capswap module inspired by Kumiko and Japanese woodblock print style
Wind's Howling! Slim & Modular Plate! 6x2mm magnets, Recommended for print in Translucent PETG / white PLA
Since I keep my hardware in an IKEA Kallax shelf behind a door it get's quite warm in summer. To not damage the hardware I designed a heat tunnel / heat pipe for any 80mm fan that can be just glued into the top right corner. The fan will…
Custom pump cap design inspired by the iconic TE37 racing wheel , built to fit perfectly on the TITAN AIO cooler . A must-have upgrade for car lovers and PC modding enthusiasts who want motorsport vibes in their rig. ✅ Precision-modeled ✅…
Add another level of customization combined with a boost in performance by adding or stacking this modular cooling block to your Corsair Dominator Titanium memory modules Variants Single or dual fans 10mm or 20mm fan heights Fan Mounting…
Iron Man reactor for your Titan All-In-One CPU liquid coolers. You need three screws to finish the assembly. Feel free to use any filament you like, and don’t forget to show off your creations! Collections available Losi MicroT Spinner &…
Extendable Drink Cooler A threaded design that fits cans of most sizes. Engineered for insulation while still being slim and comfortable to use. Show your appreciation for Ukraine, Open Source Hardware, Linux (Tux), or the sun! Plain…
This is a quick drain guard that fits over the end of the clear PET drain hose that comes with Midea, Pioneer, Senville, Mr. cool mini splits/heat pumps. Didn't want any flying insects or spiders crawling up in there. This should snap…
A cool action figure you can play with. Bigger than Cool Little Action Figure, and a lot different. It may even be more fun than it.
This is possibly the smallest PC Testbench with dual 360mm Radiator Support. It has mounting for ATX motherboards and therefore also ITX. mATX can be mounted as well but is not supported on the bottom two screw holes. eATX should also…
Description These are test pieces used for verifying if the DDR5 RAM coolers here will fit your motherboard before you pay any money for them. It is intended that you print the corresponding test piece you want to try and then attempt to…
If you find your toolhead board getting a bit too hot while printing simply add a 3010 24v fan! Edit: Fixed top so fully flat for better printing! Edit: Added vented version. Edit: Added the fan mount here too for ease. Edit: Totally…
These Files are Version 2.0 of the HAF Case Top Cover Fan Duct. This is a Fan Duct designed to cover the top opening of the HAF 912 Case. This model has locator pins that use the watercooling holes. If you want a version that uses other…
An improved top fan for the GMKTEC K6. The fanmount.stl is desiged for the noctua NF-A12x25 5V PWM fan that can be directly connected to the internal mainboard with a little modification (the wires on the connector have a different…
4020 fan housing for cooling XGSPON ONU Stick SFP+ (8311 WAS-110) rack mountable for UDM Pro/SE/MAX XGSPON ONU Stick SFP+ Link1 , Link2 Fan model: 4020 Requires support: Tree Slim What you see in the image was printed with Creality…
Hey hello. Made a version of a backcover for usage of the original RaspberryPi passive cooler. Update: added Version for Hackergadgets CM Carrier Board. What to print: 1x backcover choosen by board Back.stl is for stock ClockworkPi…
Full Image Catalog The complete gallery of my works can be found at Portfolio. You can search by the file’s reference number or simply click the preview image to open it directly.This chibi Bugs Bunny model captures the mischievous and…
If you have a water cooled PC, you may intend to use a Filter-Element within your loop, to prevent the pump from sucking in dust/dirt. Most In-Line Filter-Elements are not easy to clean, because you have to completely empty your loop or…
Printed on 25% infill with 3 walls, standard settings otherwise. I attached it using 1 M3 x 20mm bolt (may be able to use 16mm), 1 M3 nut, and 1 M3 washer. I put a few wraps of electrical tape underneath the thumb throttle to help it grip…
v.PC – Alphacool Core 200 Reservoir Mount for the Voron inspried PC This is an add-on part for my Voron-inspired PC case project: v.PC - Voron inspired PC Case It is designed only for the Alphacool Core 200 reservoir and I cannot…
In an effort to keep the ps4 pro cool at minimum fan speed, I cut a hole on the top cover and used this grill to prevent accidentally touching the fan. This is not created to prevent dirty air from entering the console. If you are doing…
This design improves and adapts the attached original models to my needs — hopefully, it will be useful for you too 🙂 Improvements 1) Simplified It is now fully 3D printed. Most parts are designed to be tight push fits. Can be assembled…
A common problem with AiOs and modern CPUs is the lack of VRM cooling around the CPU socket. With this adapted cap you can mount any 120mm fan (with a 105mm hole spacing) to ensure sufficient airflow over the VRM componnents. No supports…
Cooler Master Qube 540 - Handy - Halter Das Modell besteht aus einem “Toaster” mit 4 Füßen und einem Toast mit Schriftzug “Cooler Master”. Die Füße werden eingesteckt und halten das Modell auf dem Qube. Filament: PETG / PLA Düse 0,4mm,…
Introducing the Toyota Tacoma Rock Crawler Dog Box with Rack, Fuel Cans, and Yeti Cooler – a must-have accessory for remote control rock crawler enthusiasts. Designed in 1/24th scale, this detailed model can be easily scaled to suit your…
Compatible Products: MOZA R5 Wheelbase MOZA R9 Wheelbase MOZA R12 Wheelbase Required Hardware (Not Included): 4× M5 nuts 4× M5×40mm bolts 2× M3×25mm bolts 1× 120mm cooling fan (120mm×120mm×25mm) Installation Instructions: Step 1: Remove…
Here are some feet for the cooler master cube 540. These feet go on the feet of the case. Better bolt it down! We don't want it to walk away!
Let your Cooler Master MasterFrame fly. Do not wait and print those cool upgrade for your CoolerMaster MasterFrame 600 Model details: Completly new front panel New top panel with fancy wing Two wings from lef and right side Print…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com. You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
UPDATES 11/16/25 Added versions of both cooling ducts for the smaller 4.1-4.5mm wide heat inserts. This is a lightweight fan duct based off of my original cooling duct design for the Qidi Q2. The duct with both heat inserts and bolts…
The coolie hat of my old Logitech X52 hotas broke just while I was landing my space ship. After being annoyed for some seconds I designed a printable replacement. Be warned - this repair is not for beginners. It includes small screws,…
This is an awesome case. I just added a filter to the top and an exhaust fan on the bottom. Not sure if it does any good but it's a 3d printer and a raspberry Pi, why not right…
fan mount for 60mm fans on SKR mini or Creality V2.x Mainboards
Help this poor fish!! Jokes aside, here is my second entry for the Cooler Master: FreeForm Playground contest (still on the sea theme haha). I got this idea by thinking back to when I was younger, I used to believe that water-cooling…
Thanks for supporting me over the years! Files are now free for personal use. Consider buying me an ice cream or something :) @ https://ko-fi.com/palmtopper Files for the Tacticool Aeon Kit. Take your Aeon to the next level! Add a stock,…
So here's a very cool 3D logo of mine, having 3 most fav. subject's of mine, Math, Phy and Chem, My first 3d CAD ever!
Disclaimer : This model involves AI-assisted generation and has been manually processed and optimized for 3D printing. The mesh is verified to be watertight and error-free. 💙 Enjoying the Freebies? I love bringing these concepts to life…
A new 3D figurine generated by AI, a Cool Little Pacman. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the camera…
The original handle broke, so I recreated this one by replicating the design. Handle Restores functionality V1-TESTED WORK V2-NOT TESTED i fix some dimennsions there
WARNING: You are dealing with pressurized systems using stuff you 3d printed in your own house designed by some guy on the internet. Please pressure check your system before first use, and wear safety glasses. I am not liable for any…
Description The stock model cooling fan duct sucks. Here I have redesigned one. The main purpose is to add air flow guiders so the cooling air could be more even and stronger. To maintain the dimension is important so it would not cause…
Skadis Case for Raspberry Pi 5 with cooler and NVMe base This is a Skadis-compatible case for the Raspberry Pi 5 with support for an active cooler and an NVMe base mounted underneath. Print Settings: Support is required for the body.…
![[Corsair Classic] Titan All-In-One Cooler Capswap module](https://media.printables.com/media/prints/ce7e2400-974a-41b7-b72e-1f5308d85fcc/images/10140713_b1a75801-5a89-4cb3-8a9f-eef1fcc11669_83c29e6f-37b9-4858-8623-f972e1f3b871/20250702_113809.jpg)
