1 / 3
Cap for Primo Water cooler container
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cap to re-close the Primo water container, useful for camping/outdoors
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 108
- Makes
- 0
- Views
- 534
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Primo bottled water is a great option for water at a campground without potable water, especially in combination with a pump. The water container is big, robust and easy to carry.
Primo White Water Cooler Pump (at Lowes)
I wanted to be able to refill and transport the water container when a new fill was not readily available, so designed a cap to robustly close it.
Printing instructions
- Important: print the parts in dissimilar materials to prevent high friction/sticking of the threads. Recommendation: print the Collar in PLA and the Cap in PETG
- Default print settings work fine
- No supports needed
Assembly instructions
- Use a #8 - ½ inch bolt & nut to attach the Collar to the container
- Re-use the original closing cap for good re-sealing (see picture):
- remove it without punching the top
- trim it to 11 mm / 4.35 inch height; it should nicely snap back on
- make sure to keep and re-use the inner liner