Cooler Master HAF 912 - Top Fan Duct Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fan Duct Cover for the Top opening on the Cooler Master HAF 912 Case
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 160
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Standard Digital File License
These Files are Version 2.0 of the HAF Case Top Cover Fan Duct.
This is a Fan Duct designed to cover the top opening of the HAF 912 Case. This model has locator pins that use the watercooling holes. If you want a version that uses other holes, contact me. The model was designed to “just” fit within the Prusa MK3S Print Bed.
For those of you that still run this beast of a case, you will understand what this is for. The top mesh opening on the case is quite susceptible to dust, debris, etc. I originally thought to remove the top fan and block off the top mesh. Then, I thought about designing a fan duct cover. Is it airflow efficient? Most likely not. I'd rather have a fan at the top pulling air in with this 3D printed duct then fully blocking it off. There is also the argument of wanting to use as much of the Prusa MK3S print bed as possible.
As for printing the beast, the Version 1.0 files I landed on 0.30 Layer height, with 8% gyroid infill and no changes to perimeters. The print is quite durable and holds up well enough. I redesigned it and created the Version 2.0 files. It has a bit more of the HAF design and less duct wall coverage to allow more airflow.
- Layer Height: 0.30 (Used the Draft 0.30 profile for the MK3S)
- Infill Density: 8% to 12%
- Infill Pattern: Gyroid
- Textured PEI Sheet for the textured finish (Plate finish is your choice, make sure to adjust for warping)
Disclaimer: The photo gallery showcases the Version 1.0 of the design.