Raspberry Pi 5 Case with cooler and with nvme base

Skadis Case for Raspberry Pi 5 with cooler and NVMe base

This is a Skadis-compatible case for the Raspberry Pi 5 with support for an active cooler and an NVMe base mounted underneath.  

Print Settings:

• Support is required for the body. 

Variants

• Without Skadis Holes

  • Step file: no-skadis-raspbery-pi-5-nvme-and-cooler.step

  • Body: no-skadis-raspbery-pi-5-nvme-and-cooler-body.stl

  • Lid: 

    • symbol-down-raspbery-pi-5-nvme-and-cooler-lid.stl or 

    • symbol-up-raspbery-pi-5-nvme-and-cooler-lid.stl

• With Skadis holes (charger cable from bottom)

  • Step file: skadis-charger-cable-bottom-raspbery-pi-5-nvme-and-cooler.step

  • Body: skadis-charger-cable-bottom-raspbery-pi-5-nvme-and-cooler-body.stl

  • Lid: symbol-down-raspbery-pi-5-nvme-and-cooler-lid.stl

• With Skadis holes (charger cable from top)

  • Step file: skadis-charger-cable-top-raspbery-pi-5-nvme-and-cooler.step

  • Body: skadis-charger-cable-top-raspbery-pi-5-nvme-and-cooler-body.stl

  • Lid: symbol-up-raspbery-pi-5-nvme-and-cooler-lid.stl

Additional Parts you need:

• skadis mount:

• 4x Screws: m2,5x14mm (I used: https://amzn.eu/d/8PsxzUF)

• 4x Threaded Inserts: m2,5x4x3,5mm (I used: https://amzn.eu/d/gCLrDDn)

Compatible  Hardware: 

• nvme base: https://www.berrybase.de/pimoroni-nvme-base-fuer-raspberry-pi-5-pcie-m-key-nvme-ssd-unterstuetzung

• cooler: https://www.berrybase.de/raspberry-pi-active-cooler-luefter-fuer-raspberry-pi-5

• raspberry pi 5: https://www.berrybase.de/raspberry-pi-5-8gb-ram