Raspberry Pi 5 Case with cooler and with nvme base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Skadis Case for Raspberry Pi 5 with cooler and with nvme base
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Skadis Case for Raspberry Pi 5 with cooler and NVMe base
This is a Skadis-compatible case for the Raspberry Pi 5 with support for an active cooler and an NVMe base mounted underneath.
Print Settings:
Support is required for the body.
Variants
Without Skadis Holes
Step file: no-skadis-raspbery-pi-5-nvme-and-cooler.step
Body: no-skadis-raspbery-pi-5-nvme-and-cooler-body.stl
Lid:
symbol-down-raspbery-pi-5-nvme-and-cooler-lid.stl or
symbol-up-raspbery-pi-5-nvme-and-cooler-lid.stl
With Skadis holes (charger cable from bottom)
Step file: skadis-charger-cable-bottom-raspbery-pi-5-nvme-and-cooler.step
Body: skadis-charger-cable-bottom-raspbery-pi-5-nvme-and-cooler-body.stl
Lid: symbol-down-raspbery-pi-5-nvme-and-cooler-lid.stl
With Skadis holes (charger cable from top)
Step file: skadis-charger-cable-top-raspbery-pi-5-nvme-and-cooler.step
Body: skadis-charger-cable-top-raspbery-pi-5-nvme-and-cooler-body.stl
Lid: symbol-up-raspbery-pi-5-nvme-and-cooler-lid.stl
Additional Parts you need:
skadis mount:
4x Screws: m2,5x14mm (I used: https://amzn.eu/d/8PsxzUF)
4x Threaded Inserts: m2,5x4x3,5mm (I used: https://amzn.eu/d/gCLrDDn)