1 / 1
Filling Aid for the Mighty/Mighty+ and Crafty/Crafty+
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filling aid funnel for the Mighty/Mighty+ and Crafty/Crafty+ from Storz & Bickel
- Ocena
- 5 / 5
- Polubienia
- 41
- Pobrania
- 720
- Wydruki
- 3
- Wyświetlenia
- 2167
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 3) (Komentarze: 4)Remiksy (1)Kolekcje (61)Powiązane
I didn’t realize that the Mighty+ doesn‘t ship with a Filling Aid tool like the original Mighty did, so I went and made my own.
This model should fit the Mighty/Mighty+ and Crafty/Crafty+ from Storz & Bickel.
Since the tolerances on the fins are fairly tight, I recommend the following slicer settings:
- Orient the model funnel-side up.
- Add snug supports only under the two fins that lock into the vaporizer body.
- Enable Variable Layer Height, drag the Quality/Speed slider all the way to the left (max quality), then click the button labeled “Adaptive”. This will help ensure the fins fit into the vaporizer body better.