Support for Weber iGrill2 on Weber Grill
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have a weber "Master Touch" Grill and a iGrill2 thermometer.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 33
- Wydruki
- 1
- Wyświetlenia
- 810
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
I have a weber "Master Touch" Grill and a iGrill2 thermometer.
The problem is where to place the thermometer during grilling. It has a magnetic base, but you cannot stuck it to the kettle, it is too hot.
So I designed and printed a small mounting plate that clamps on the front leg of the grill.
I used the little metal disc that was supplied with the thermometer.
I uploaded a new (version 2a). This one has a better grip on the leg of the Grill.
I added the Prusa slicer file for PETG.
I hope that with PETG it will be better temp resistant then with PLA, and will not slide down when the sun is shining on the mounting plate.
Of course you are completely free to use my designs non commercially, but if…. you want to support me buy me a coffee. (click on the red text)
Print Settings
Printer: DaVinci Mini w
Rafts: No
Supports: Yes
Resolution: 0.3
Infill: 20%
Notes:
The supports are needed for the "cut out" for the metal plate.
The cut out is for indicating the right place to stick the metal disc.
I printed it with PLA, but on hot summer days the plastic gets a bit weak and the thermometer slides down. I corrected this by applying rubber cement on the inside of the clamp.
Probably it is better to print it with ABS or PETG.
How I Designed This
Designed with Tinkercad