Phillips Hue Wall Switch Cover/Adapater
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These adapters take the place of existing switch covers and receive Phillips Hue remotes - including the magnet feature.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 307
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed these to let me replace wall switches with Phillips Hue remotes so that I can leave the switches on and use smart bulbs. There are two circles on the back for magnets, and a passthrough to allow soft resets via the switch. Hope this is helpful for someone!
Printing Instructions:
For best results, print back-down with a brim and supports. Recommend using 0.16mm layer height or less- I've had good results with Prusament Marble Grey for hiding layer lines.
PLEASE NOTE: No part of this design is ETL or otherwise certified. These are not approved in any way as electrical components. Use at your own risk.