Lightweight Brother P-Touch TZ & TZe label tape organizer - no supports (remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remixed modular holder for Brother label maker tapes (and various 3rd party tapes).
- Ocena
- 4,833 / 5
- Polubienia
- 78
- Pobrania
- 242
- Wydruki
- 8
- Wyświetlenia
- 1614
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A modular holder for Brother label maker tapes (and various 3rd party tapes). It fits all standard tape widths - 6mm, 9mm, 12mm, 18mm, and 24mm.
This is a remix of Nieuniknione's model (that is a remix of vinceformosa's model) that adds extra holes. This leads to the following attributes (compared to the Nieuniknione's model):
- ~30% less filament needed.
- 0-10% longer print time (depending on the nozzle and the layer height).
- Probably slightly less sturdy (however, you can still move it around without any problem - I've never noticed any problem).
Printing instructions:
Print in default orientation in PLA. No supports are needed for any of the holders. Also, as this organizer is most probably going to be hidden in a drawer or wardrobe, you can prefer speed instead of look - set maximum allowed layer height, and feel free to even use a bigger nozzle - I printed all of mine with 0.6mm nozzle with the layer height being 0.40mm on my Průša Mini (see the photos), but any nozzle and layer height combination will do just fine.
Assembling instructions:
Click individual parts together. If you have difficulties clicking 2 pieces together (the holes are quite sensitive to printer precision), just use 4mm drill to expand the holes. You can also hammer 2 parts together - just hit on the pins (I did it on a 7-holders-tall tower without breaking anything).