FLYING PROPELLER - New Model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an upgraded version of my previous model.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 127
- Wydruki
- 0
- Wyświetlenia
- 406
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
This is an upgraded version of my previous model.
https://www.printables.com/model/429165-print-in-place-flying-pro
Official Release Version 3.2 is available from the 29th of April 2023.
- Kit: Changes are to almost all parts except for "Pully". On that only name was changed.
- Pull Stick: Name changed to "Pully"
- Propeller: Propeller is now bigger and stronger and flies better.
- Handle: The handle was completely redesigned for a nicer grip and finer print.
- Gear: Changes are made only in size to accommodate the new size of the "Shaft" and to accommodate 1.75mm filament for locking.
- Shaft: The shaft is now ticker and stronger. The hole size is adjusted to fit a 1.75mm filament
Print Settings
Version 3.2:
Layer height: 0.2mm
Infill: 5%
Parameters: 2
Supports: No
Brim: Yes
The first layer in: ~22m
Print time: ~ 3h40m
Filament consumption: ~39g ~13m